Pro
Security Warehouse
|
|
|---|---|
 |
|
|
|
|
|
|
|||
|
 Advanced Signaling L1000SS |
ADVANCED SIGNALING: L1000SS 1000 LB. MAG LOCK | |
|
For outswing doors,the Advanced Signaling L1000SS mag lock has 1000 lbs. of holding force and works for most applications. Requires 12/24VDC. The L1000SS has a low current draw of 255mA compared to other mag lock brands. Comes in a stainless steel finish for years of weather resistant, maintenance free operation. 5-year conditional warranty. UL listed. Dimensions:
10.6" X 1.6" X 2.6" - Wiring area: 2.6" X 1.75"
|
||
|
|
|||
|
Usually
ships within 24-48 hours |
Recommended components: 12/24 VDC power supply, request to exit devices | ||
|
|||
|
|||
|
 Eclipse ECL-ACC500 |
ECLIPSE: ECL-ACC500 1200 LB. MAG LOCK | |
|
The ECL-ACC500 is a 12/24 volt maglock with 1200 pounds of holding force. The anodized aluminum housing won't rust. Dual voltage 12 or 24 VDC (selectable). Has no residual magnetism. Detachable faceplate. Adjustable mounting bracket - MOV surge protection. Complete hardware included - 1200lb (545kg) 500ma/12VDC, 250ma/24VDC. A great value for a dependable maglock. Dimensions: 10.5" x 2.9" x 1.5"
|
||
|
|
|||
|
Usually
ships within 24-48 hours |
Recommended components: 12/24 VDC power supply, request to exit devices | ||
|
|||
|
|||
|
 Eclipse ECL-ACC300 |
ECLIPSE: ECL-ACC300 600 LB. MAG LOCK | |
|
For outswing doors, the ECL-ACC300 is a 12/24 volt maglock with 600 pounds of holding force. The anodized aluminum housing won't rust. Dual voltage 12 or 24 VDC (selectable). Has no residual magnetism. Detachable faceplate. Adjustable mounting bracket - MOV surge protection. Complete hardware included - 600lb (545kg) 500ma/12VDC, 250ma/24VDC. The smaller size is great for those glass doors with 2.5" aluminum frames. Dimensions:
9 7/8" x 1 5/8" x 1"
|
||
|
|
|||
|
Usually
ships within 24-48 hours |
Recommended components: 12/24 VDC power supply, request to exit devices | ||
|
|||
|
|||
|
 Altronix RB5 Click for larger image |
ALTRONIX: RB5 ISOLATION RELAY | |
|
The Altronix RB5 is strongly recommended for use will keypads, intercoms, maglocks etc. . Electric locks, magnetic locks, gate openers and garage openers all create a small surge when they energise. This surge is backfed to the contacts inside the controller and can cause them to fail prematurely. This isolation relay provides a heavy duty set of contacts that protect the controller's internal components and extend the life of the device. Requires 12VDC to operate and can be powered by the same power supply as the lock provided the amperage is sufficient. Small enough to fit inside of a deep single gang electrical box or mount as needed with the adhesive pads included. The RB5 has 5A DPDT contacts. Coil draws 120mA. 12 or 6VDC selectable. | ||
|
|
|||
| Recommended components: power supply | |||
|
|||
|
|||
|
 Ditek ESS Package of two |
DITEK: ESS TRANSORB ACCESS CONTROL PROTECTOR | |
|
The Ditek DTK-ESS is a transorb (transient absorber) that is designed to protect the relays and sensitive electronics of an access control system from the "electrical spike" that occurs every time and mag lock or electric strike locks or unlocks. Connect one unit across the conductors near the lock and connect the other directly to the terminals of the access control device or panel. Prevents premature burnout of the relay contacts. Recommended for all systems that include electric locks of any kind. Works with 12 or 24 volt AC or DC systems. Does the same function as the RB5 above only easier to use and install. Not polarity sensitive. Package of two. | ||
|
|
|||
| Recommended components: | |||
|
|||
Can't find what your looking for? We have hundreds of additional products not listed on the web site for great prices! Click here for info on more stuff.