Pro
Security Warehouse
|
|
|---|---|
 |
|
|
|
|
|
|
|||
|
 NVT NV-212A |
NVT: NV-212A TWISTED PAIR TRANSCEIVER - 500FT. | |
|
This short range passive transceiver is capable of transmitting video up to 500 feet over a single unshielded twisted pair. This allows you to use ordinary phone lines that may already exist in your facility but are not in use. Use one NV-212A at the camera and one NV-212A at the monitor. No power is required. | ||
|
|
|||
|
Usually ships within 24-48 hours |
Recommended components: video cables | ||
|
|||
|
|||
|
 NVT NV-213A |
NVT: NV-213A TWISTED PAIR TRANSCEIVER - 1000FT. | |
|
This short range passive transceiver is capable of transmitting video up to 1,000 feet over a single unshielded twisted pair. This allows you to use ordinary phone lines that may already exist in your facility but are not in use. This unit also provides surge suppression, which eliminates the need for separate surge protection equipment. Use one NV-213A (or NV-213A-M) at the camera and one NV-213A (or NV-213A-M) at the monitor. No power is required. | ||
|
|
|||
|
Usually ships within 24-48 hours |
Recommended components: video cables | ||
|
|||
|
|||
|
 NVT NV-213A-M |
NVT: NV-213A-M TWISTED PAIR TRANSCEIVER - 1000FT. | |
|
This short range passive transceiver is capable of transmitting video up to 1,000 feet over a single unshielded twisted pair. This allows you to use ordinary phone lines that may already exist in your facility but are not in use. This unit also provides surge suppression, which eliminates the need for separate surge protection equipment. Use one NV-213A-M (or NV-213A) at the camera and one NV-213A-M (or NV-213A) at the monitor. This unit is outfitted with a male BNC connector to allow direct connection to a camera or other device. No power is required. | ||
|
|
|||
|
Usually ships within 24-48 hours |
Recommended components: video cables | ||
|
|||
|
|||
|
 NVT NV-652R |
NVT: NV-652R TWISTED PAIR RECEIVER - 3000FT. | |
|
This all distance active receiver can be used to receive video over an unshielded twisted pair for distances of up to 8,000 feet. This allows you to use ordinary phone lines that may already exist in your facility but are not in use. It can be used with a NV-213A (or NV-213A-M) to achieve distances of up to 3,000 feet. Used with a NV-653T transmitter it will support distances of up to 1 mile (5,280 feet) using CAT-3 or 1.5 miles (8,000 feet) using Cat-5. Other features include built-in surge protection, ground lifting, brightness and sharpness controls. Blue LED indicates power and green LED shows active. This unit requires a floating 12-24VAC/DC power supply that is not included in this price. | ||
|
|
|||
|
Usually ships within 48-96 hours |
Recommended components: video cables, power supplies | ||
|
|||
|
|||
|
 NVT NV-653T |
NVT: NV-653T TWISTED PAIR TRANSMITTER - 8000FT. | |
|
This active transmitter can be used to transmit video over an unshielded twisted pair for distances of up to 8,000 feet. This allows you to use ordinary phone lines that may already exist in your facility but are not in use. Use with a NV-652R receiver to achieve distances of up to 1 mile (5,280 feet) using CAT-3 or 1.5 miles (8,000 feet) using Cat-5. Other features include built-in surge protection, three position range switch, blue power LED and green active LED. This unit requires a floating 24VAC/DC power supply that is not included in this price. | ||
|
|
|||
|
Usually ships within 48-96 hours |
Recommended components: video cables, power supplies | ||
|
|||
|
|||
|
 Eclpise ECL-BTB |
ECLIPSE: ECL-BTB TWISTED PAIR TRANSCEIVER - 1300FT. | |
|
This value line twisted pair transceiver (UTP) transmits full motion color up to 1300' or black and white video up to 1900' when used with a second ECL-BTB as the receiver. The compact size of this unit can fit right on the back of the camera! Provides excellent rejection against outside interference. Use this transceiver with an active receiver for a transmission distance of 3300'. The ECL-BTB is passive and does not require power. A low cost alternative to fiber optic equipment. Now shipping with the 4" BNC tail for no additional cost. This makes the connection to the back of a DVR and camera even easier! |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables | ||
|
|||
|
|||
|
 Securemax W-VB301T |
SECUREMAX: W-VB301T TWISTED PAIR TRANSMITTER - 6000FT. | |
|
The Securemax W-VB301T is an active video balun transmitter that will send full motion video up to 6000' through twisted pair wiring (such as CAT 5). This economically priced high quality unit has adjustments for level and sharpness when used with the W-VB301R below. Full metal case. BNC input. Data terminals for twisted pair cable. Includes a 12VDC power supply. Provides excellent rejection against outside interference. A low cost alternative to fiber optic equipment. NOT for use with runs of less than 1800 feet. |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: W-VB301R below, video cables | ||
|
|||
|
|||
|
Securemax W-VB301R |
SECUREMAX: W-VB301R TWISTED PAIR RECEIVER - 6000FT. | |
|
The Securemax W-VB301R is an active video balun receiver that will receive full motion video up to 6000' from twisted pair wiring (such as CAT 5). This economically priced high quality unit has adjustments for level and sharpness when used with the W-VB301T above. Full metal case. BNC output. Data terminals for twisted pair cable. Includes a 12VDC power supply .Provides excellent rejection against outside interference. A low cost alternative to fiber optic equipment. NOT for use with runs of less than 1800 feet. |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: W-VB301T above, video cables | ||
|
|||
|
|||
|
Eclipse ECL-BTT |
ECLIPSE: ECL-BTT TWISTED PAIR TRANSMITTER - 8000FT. | |
|
This value line twisted pair active transmitter works with the ECL-BTR active receiver to bring in clear video signals from up to 8000' away. Has quick connect terminal blocks for UTP and power connections and a BNC for the video input. Can work with either 24VAC or 12VDC providing flexible connections with cameras. Built in transient protection and ground lifting for voltage spikes. Exceptional interference immunity. Power supply is included. A low cost alternative to fiber optic equipment. | ||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables, ECL-BTR (below) | ||
|
|||
|
|||
|
Eclipse ECL-BTR |
ECLIPSE: ECL-BTR TWISTED PAIR RECEIVER- 3300 to 8000FT. | |
|
This value line twisted pair active receiver works with UTP transmitters to receive video from up to 3300' when used with the ECL-BTB and up to 8000' when used with the ECL-BTT as the transmitter. Has quick connect terminal blocks for UTP and power connections and a BNC for the video output. Can work with either 24VAC or 12VDC providing flexible connections with cameras. Built in transient protection and ground lifting for voltage spikes. Exceptional interference immunity. Power supply is included. A low cost alternative to fiber optic equipment. | ||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables, ECL-BTB or ECL-BTT transmitter above | ||
|
|||
|
|||
|
 Securemax W100VP |
SECUREMAX: W100VP TWISTED PAIR TRANSCEIVER w/Power - 2000FT. | |
|
This power integrated twisted pair transceiver (UTP) transmits full motion color up to 2000'. When used with the other modules listed below, this system will also transmit power to the camera via the CAT 5 twisted pair cable. This makes installation possible with only one cable! The power can be transmitted up to 200' depending on the camera used. |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables, Securemax VB-HUB4 and W414VP on this page | ||
|
|||
|
|||
|
 Securemax VB-HUB4 (click for larger image) |
SECUREMAX: VB-HUB4 4 ch. TWISTED PAIR RECEIVER - 2000FT. | |
|
This unit has 4 twisted pair transceivers in one compact module for big savings when you need more than one channel of video. Use either a RJ-45 connector with CAT5 cable or individual pairs. Connections for both are available. Standard BNC input/outputs. Works great with the Eclipse ECL-BTB or the Securemax W100VP above (add the W414VP for integrated camera power). |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables, Eclipse ECL-BTB, Securemax W100VP and W414VP on this page | ||
|
|||
|
|||
|
 Securemax W414VP (click for larger image) |
SECUREMAX: W414VP 4 ch. POWER INJECTOR | |
|
Add this module to the W100VP camera transmitter and the VB-HUB4 above to inject DC power over the unused wires to the camera (power supply separate). Makes your installation clean and neat. RJ45 connectors to pass through the video, screw terminal strip to inject the power. See the diagram below or call for more info.
|
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: video cables, Power supplies, Securemax W100VP and VB-HUB4 on this page | ||
|
|||
Can't find what your looking for? We have hundreds of additional products not listed on the web site for great prices! Click here for info on more stuff.
